Plastic shredding machine relative to the importance of plastic recycling

Nowadays, the waste plastic recycling problem existing in our life has already become an ecological problem. More and more people have already understood the importance of plastic recycling and recycling. At present, only 2% of plastics are recycled. This means that more than a third of plastic waste goes into the environment, 14 percent goes to incineration or recycling, and 40 percent ends up in landfill.

According to the analysis of market demand, the special equipment of scientific research and development is mainly to solve the recycling, production and processing of renewable waste. Plastic shredding machine special equipment is mainly composed of motor, reducer, rotary shaft, imported moving knife, fixed knife, frame, frame, box, working platform and so on. The special equipment is installed in the bottom of the crushing warehouse under the fixed knife, the rotating knife shaft is installed on the removable embedded knife, the total number of moving knives according to different product models and the size of the rotating knife shaft, and the moving knife is a four corner surface can use the knife, with blunt after disassembly to change the direction, until the four sides with blunt after sharpening the knife, because it is claw type moving knife, rotary cutting, And the fixed tool and moving tool are imported SKD11 material, after heat treatment process hardness up to HRC60° above, so long service life, strong cutting ability, high production capacity, the correct use of more than 1000 tons must be sharpened. In addition, the plastic shredding machine adopts PLC programmable control, high degree of automation technology, conducive to practical operation.

But in order to better ensure the correct daily operation of the plastic shredding machine, if you do not meticulously maintain and maintain, it will have a great impact on the service life of the plastic shredding machine, especially on the inspection of some wearing parts. Therefore, it is necessary to develop safety, full operating procedures and maintenance system, and repair and change the wearing parts on time. Avoid non-standard use of actual operations may lead to special equipment and safety accidents.